Şark Pleksi

Glass rod

Borosilicate Glass rod

Soda-lime tubular glass products in two grades: “I-860” thermometer glass and “I-880” tubes. The range of products includes transparent glass tubes and rods in both grades.

Our range of capillary tubes, also made from “I-860” thermometer glass, covers round and prismatic forms, but the Optima shape is also available on request

Borosilicate tubular glass products made of “I-330” and “I-510”

Besides the manufacture of tubes, we can offer you many different technical and technological options for the final processing of the products plus the mechanical and manual manufacture of products to your specification in soda-lime and borosilicate glass 3.3. And if you’re looking for a particular product with certain dimensions but can’t find it here, simply contact us. We can make just about anything possible!

INSTRUCTIONS FOR PROCESSING

tubing, capillary and rod material properties guarantee a very good workability in glass forming and

dividing, which is usual with technical glass. To remove temporary stress, which originates in processing, it is

appropriate to warm the glass through to a temperature of 550°C and, to leave it at this temperature over a period up to

a maximum 30 minutes; as a rule, in thin-walled products a fraction of this time would suffice. With regard to glass

chemical durability the stabilization time should be as short as possible. For subsequent cooling down, the Annealing

speeds have been recommended in the following tab

Applications:

Packaging (e.g. lab-ware and pharmaceutical applications)

Solar industry

Thermometer production

Lighting products

Fibre production

Plant engineering

Chemical industry

 

Borosilicate Glass rod

Soda-lime tubular glass products in two grades: “I-860” thermometer glass and “I-880” tubes. The range of products includes transparent glass tubes and rods in both grades.

Our range of capillary tubes, also made from “I-860” thermometer glass, covers round and prismatic forms, but the Optima shape is also available on request

Borosilicate tubular glass products made of “I-330” and “I-510”

INSTRUCTIONS FOR PROCESSING

tubing, capillary and rod material properties guarantee a very good workability in glass forming and

dividing, which is usual with technical glass. To remove temporary stress, which originates in processing, it is

appropriate to warm the glass through to a temperature of 550°C and, to leave it at this temperature over a period up to

a maximum 30 minutes; as a rule, in thin-walled products a fraction of this time would suffice. With regard to glass

chemical durability the stabilization time should be as short as possible. For subsequent cooling down, the Annealing

speeds have been recommended in the following tab

Applications:

Packaging (e.g. lab-ware and pharmaceutical applications)

Solar industry

Thermometer production

Lighting products

Fibre production

Plant engineering

Chemical industry

Glass RodDimension mm.Weight Kg.Lenght mm)
Glass Rod30,241500
Glass Rod81681500
Glass Rod92131500
Glass Rod102631500
Glass Rod123781500
Glass Rod145151500
Glass Rod166721500
Glass Rod188511500
Glass Rod2010501500
Glass Rod2212711500
Glass Rod2415121500
Glass Rod2617751500
Glass Rod2820591500
Glass Rod3023631500
Glass Rod40,421500
Glass Rod50,661500
Glass Rod60,951500
Glass Rod71291500

 

Borosilicate Glass Rod

Technical Information

By its chemical composition and properties Simax glass ranks among the types of glass of the group of clear „hard“ borosilicate glass „3.3“, which excel in a high heat and chemical resistance and which are defined by international ČSN ISO 3585 Standard. It complies to the full with the properties prescribed by these standards.

PDF Teknik Table

Borosilicate Glass Rod PDF

Download

Borosilicate Glass Rod Chemical Properties Products made of SIMAX glass have chemical stability, they are practically inert, and, may be noted by a high resistance to the effects of water, water vapours, acids, salts solutions and by relatively a fair resistance to alkali. Glass is etched by hydrogen fluoride and concentrated trihydrogen phosphate (phosphoric acid), while concentrated hot alkaline solutions corrode glass. Corrosion may be increased, if acid medium alternates with alkaline medium permanently. SIMAX glass chemical resistance has been provided by ISO 3585 Standard, eventually, ČSN ISO 3585, and, it has been accurately assessed using standard international testing methods defined by ISO and DIN ISO Standards.

Reviews

There are no reviews yet.

Be the first to review “Glass rod”

Your email address will not be published. Required fields are marked *

Scroll to Top